AMADA ID40DT SPOT WELDER
Stock ID: #9205
SPECIFICATIONS:
Provides a clean, sparkless weld that requires little or no post processing
Variety of material types and thicknesses, including conductive and coated materials
Easily programs and stores multiple weld schedules in the Micro Computer Controller's memory
Stable current output
Low power consumption
1.1. Welder kVA Rating
80 kVA MAX. Welding Current
30,000 amps MAX. Electrode force
1,500 lbs Admissible Duty Cycle
10% Electrodes
RWMA #5 (taper number) Throat Depth 32"
Horn Spacing 1.970" x 0.787" (maximum open x working open)
Electrode Holder 1¼" x 8" (diameter barrel x long)
Holder Arm 2.7" (diameter)
Required Air 71 psi 79.2 gallons/minute
1.2. Inverter Controlled Power Supply
Power supply primary voltage 3-phase, 460V 100A
Voltage Output 300V
Current output 600A
Power demand maximum capacity 180kVA
Duty Cycle 5%
Estimated cooling water amount 5L/minute
Required cooling water 1.584 gallons/minute
new replace cost $29-K