SALVAGNINI L-3 FIBER LASER
Stock ID: #9341
EQUIPPED WITH: SALVAGNINI CONTROL & SALVAGNINI METAL STUDIO SOFTWARE SIDEROS DUST COLLECTOR IPG YLS-2000 LASER IPG CHILLER 2000 WATT SALVAGNINI L3 FIBER LASER
TABLE SIZE 5
WORKING RANGE 5
Z-AXIS STROKE 3.9"
MAX POSITIONING SPEED 4724 IPM
POSITIONING ACCURACY .003"
POWER OUTPUT 3,000 WATTS
POWER SOURCE IPG YLS-3000 DIODE BASED LASER
ASSIST GAS NITROGEN, OXYGEN, COMPRESSOR AIR
CUTTING CAPACITY (STEEL) 24 GAUGE TO 3/4"
CUTTING CAPACITY (STAINLESS STEEL) 24 GAUGE TO 7/16"
CUTTING CAPACITY (ALUMINUM) 24 GAUGE TO 3/8"
CUTTING CAPACITY (COPPER) 24 GAUGE TO 24" X 5/16"
CUTTING CAPACITY (BRASS) 24 GAUGE TO 7/32"
ELECTRICAL 460V / 60 HZ / 3 PH
MAXIMUM POWER CONSUMPTION (KW) 18KW
MACHINE EQUIPPED WITH
SYSCON SALVAGNINI PC BASED CONTROLLER IPG YLS-3000 DIODE BASED LASER SINGLE OPTIC HEAD COOLED WITHOUT GAS IPG LC71-0 CHILLER SIDEROS ECO 4EX DUST COLLECTOR 5' X 10' SHUTTLE TABLES
This used Fiber Laser Cutting Machine features a 3,000 Watt Power Output, an IPG YLS-300 Laser source, an IPG LC71-01 Chiller, and a Syscon Salvagnini PC Based Controller. This CNC machine comes equipped with a 5’ x 10’ Shuttle Table, a Sideros Eco 4EX Dust Collector, and a single optic head cooled without gas. The steel cutting capacity for this machine is 24 gauge to 3/4". The stainless steel cutting capacity for this machine is 24 gauge to 7/16". The aluminum cutting capacity for this machine is 24 gauge to 3/8". The copper cutting capacity for this machine is 24 gauge to 24" x 5/16". The brass cutting capacity for this machine is 24 gauge to 7/32".
Salvagnini L3 3,000 Watt Fiber-Laser cuts Extremely Fast in lighter gauges.
Here cutting .040" stainless steel at over 2,000 inches per minute straight line.
No Maintenance Laser & No Maintenance Beam Delivery.
TODAY Salvagnini : Today automation represents an indispensable condition for recovering efficiency and optimizing times. This is why L3 and L5 fiber laser systems can be set up in various ways according to the different loading and unloading requirements and machine models. The new LTWS store-tower – available in different heights, from 5 to 20 shelves – is a high-end solution featuring ultra-rapid cycles: it is able to offload a cut sheet and load a new one in 50 seconds: this makes it the fastest model available on the market. LTWS is designed to minimize downtimes: the sheet gripping device, the unloading comb, and the elevator unit are all independent, and the cycles are designed to maximize movement parallelization and optimize efficiency. LTWS is also marked by great attention to detail, from the gripping device equipped with a set of suction cups that are able to pick up not only standard commercial formats but also special formats, and the comb equipped with scratch-resistant belts. In addition to the LTWS, the new MCU sorting system for unloading single parts is an extremely reliable solution to optimize process efficiency with is innovative multi gripping function, used to pick up more than one part with the same gripping device. The gripping devices, which can have a combined suction-cup/magnet system, are universal and do not require setting up.